Trek Transponder Boat Alarm SMS Command Guide

		One tap commands (SMS one letter to Trek Transponder)
?	Help	Opens guide to Trek Transponder Commands online
A	Arm	Arms alarms
D	Disarm	Disarms alarms and clears Geofence home location
S	Status	Sends you a full status report from boat
P	Power	Sends you list of battery voltages and solar and/or shore power charging
L	Location	Shows you location of boat on Google Earth with latitude and longitude
M	Moved?	Shows distance from home (mooring) once Trek is armed in metres and 30 minute log – after arming
B	Bilges	Shows bilge float switches status
E	Entries	Shows status of entry (intruder) sensors on boat
Q	CAM1	Send you a picture from Camera 1
W	CAM2	Send you a picture from Camera 2
		Full command list (Commands available depend on model)
Monitoring Commands	Shortform	Function
batteries	P	Returns voltage of batteries 1 to 4, solar panel voltage and shore power ON/OFF status (depends on model). One tap command is P.
Solar	sol	Returns voltage of solar panel (not all models) (see sunset disable alarm if SM100A BAT3 input is used for solar)
security	E	Returns status of vessels PIR1 PIR2 ENT1 ENT2 ENT3 security sensors. One tap command is E.
bilge	B	Returns status of vessels bilge float switches. One tap command is B.
Shore Power	ac	Returns status of 240V AC shore power to vessel.
Fridge	fr	Returns temperature of vessels fridge in the range –25 to 105 Deg C. (or use for engine coolant, sea temperature etc)
Seastate (listing)	ss	Returns last 30 secs pitch and roll readings in degrees (See pitch, roll alarm)
Status	S	Returns summary of all monitored parameters. One tap command is S.
Position / Location
Position	L	Returns latitude and longitude of vessel.If Google Earth (free) is on phone shows boat location on a map. One tap command is L.
Geofence nnn		Sets geofence radius. nnn can be from 1 to 999. (To set new home position after arming you must disarm then arm). Default is 50m.
Geo?	geo?	Returns the current geofence radius setting in m. Default is 50m.
Moved?	M	Distance From Home. After arm command Moved? returns distance in metres vessel has moved from home position and 30 minute log. (Use disarm to reset). One tap command is M.
Alarm Commands
Arm	A	Arms alarms. On alarm an SMS alert will be sent to the users phone and up to 5 other phone numbers. Auto relay will activate for approx. 5 minutes on security alarm. To get new fix for Geofence and DFH you must disarm then arm again. One tap command is A.
Disarm	D	Disarms alarms and turns off Auto Relay (usually siren). Does not turn off 24hr alarms. One tap command is D.
24hr 24hroff		Enables 24 hour monitoring of an input. For example SMS the command 24hr bil to the Trek Transponder to enable 24 hour monitoring of bilge 1.
AutoDial	ad	Turning this function ON will cause Trek Transponder to call you if there is an alarm. SMS ad on to enable the function or ad off to disable.
Setfridge	sf	Sets fridge temperature alarm limit. Default is 5 Degrees C. Example: To change to -10, send command sf -10. Also sf1 ...sf5.
	sf?	Returns current fridge alarm temperature setting.
SMS and Email Commands
An1...An5 0nnnnnnnnn		Allows up to five mobile phone numbers to be added as destinations for SMS alerts where 0nnnnnnnnn is a 10 digit Australian mobile phone number and x is a memory number from 1 to 5. eg. An1 0466838137 AN2 0404500502 etc
An1...An5 clear		Removes an added number from memory number 1 to 5
an?		Returns the existing list of up to five phone numbers that will receive SMS alerts when alarms are armed
Locknumber Unlock		Locknumber command causes Trek Transponder to lock onto the number that issued the command and ignore SMS from other numbers. Unlock reverses the locknumber function and allows any number to operate unit.
Email		Sets email recipients email address, Email function OFF and Email function ON. Use email? To view.
ID		Sets label for status reports, alarms and camera images, up to 40 chars. ie. Sms ID My boat name. Sms ID and nothing else to clear.
Other Commands
Csv.rdg		Returns Trek Transponder real time data in CSV format for database
leds off leds on	Loff lon	Loff or Leds on turns on/off front panel LED’s off to save power and/or make unit inconspicuous.
reset		SMS this command to Trek Transponder to restart unit.
r1on, r1off, r2on, r2off roff		Turns ON/OFF Manual Relays. Number of relays depends on model Trek Transponder. (roff turns all off). Can be used for fridge, deck lights pumps etc. If Isolated Danger blink option is fitted it uses Relay2 as a switch. r2on will turn it ON and R2off will turn it off.
Aron, aroff		Turns ON/OFF Auto relay. (Careful – If Auto Relay is manually commanded ON the 5 minute alarm timer is disabled so if a siren is connected it won't time out and will keep going)
r?		Returns ON/OFF status of Manual Relays and Auto Relay
signal	sig	Returns the mobile phone network name and network signal strength in “per cent” at the Trek Transponder location. (Similar to “bars” on a mobile phone)
Scan or skip		Skip removes an input from alarm scan, and scan re-includes it. ie. If you dont want to monitor shore power SMS the command skip ac If you want to re-include shore power in the scan SMS the command scan ac. SMS the command sk? To check what is skipped.
defaultname/ newname		To rename, add a forward slash to end of an inputs name then enter the new name ie. pir2/ Saloon will rename PIR2 on reports as Saloon. (Use cn, abbrev for Clear Names to clear). 8 letters max. (Non volatile). DON'T USE RENAME TWICE ON SAME INPUT, USE cn FIRST.
Keyswitch on, keyswitch off	kon koff	Use to enable or disable manual keyswitch arm/disarm option. (Connect switch to CAM1P and any COM terminal). Entry and exit delay of about 30 seconds is applied. Abbreviated commands can be used, kon is keyswitch ON, koff is keyswitch OFF.
Invert input		Inverts the OK/Alarm logic of Bilge, Security and AC shore power inputs allowing use of NO or NC contacts. Swaps pitch and roll orientation. (non volatile). ie. To change ENT2 from NC input to NO input send invert ent2. To clear inverts, send ci.
Pitch nn Roll nn		S100A and SM100A only. Allows the default alarm values of 5 degrees for Pitch and Roll (list) to be over ridden and set manually. ie. Pitch 10 will set 10 degree alarm. (See sea state command).
Movementalarm on Movementalarm off	Ma on ma off	If movement alarm is command is set to on and unit is armed, auto relay will close for 5 minutes if Geofence or Pitch and Roll limits are exceeded. Connect the auto relay to siren/flashing light if this function is used as theft deterrent. To turn on send Movementalarm on (or ma on for short).
Camera Commands
CAM1, CAM2	q or w	Returns image from Camera 1 or Camera 2 by MMS. Image is 1080x1920 colour. (Cameras SM100A only). One tap commands are Q for CAM1 and W for CAM2. Beware some Telcos compress the image if you want full HD use email option
cam1 auto, cam1 manual, cam1 sd, cam1 hd cam2 auto, cam2 manual, cam1 sd, cam1 hd		Camx auto, when set, will cause the Trek Transponder to send an image from that camera on any alarm condition occurring after arm command. Cam1 manual will disable that function. x is 1 or 2. Camx hd or sd will set Trek Transponder to use that respective camera type. (Cameras SM100A only). Motion detect available January 2022 onwards.